Your bathroom is way overdue for a new vanity and sink, so let's rip out the old vanity and put in a new one. Whether you are doing a complete remodel or just replacing the old cabinet and sink there are several choices, in all price points, to help your bathroom look better and be more functional. This article will discuss different options and installation of your new vanity.
If you're on a budget the cheapest way to go is to purchase an all-in-one vanity counter top sink combination. The installation of these units is typically faster and easier but does not allow you as many options as a custom install. If you have a larger budget and more time I would recommend purchasing a quality hardwood unit to replace your old vanity. The counter top area is small enough to be very creative with tile or stone to really give your bathroom and updated look.
Matching the existing look of your bathroom can be important, especially if you're not remodeling the whole area. Keep this in mind when deciding on the style and color of your new vanity and counter top.When installing the cabinet portion of your vanity there are just a few items you'll need from your local building store. Wood shims and 3 inch long number 10 screws are really all that's necessary for your install. Set your cabinet in place and take your level side to side and front to back to see how far the cabinet is off. For some reason bathroom floors never seem to be level, this is where the wood shims come into play. Place the shims under the lowest corners until the top of your cabinet is level front the back side to side. Also check the level up and down to make sure your cabinet is square. Use a stud finder, just above the cabinet, to mark stud locations. Another option is to take a hammer and nail and put a series of holes just above the cabinet back to find the stats. Don't worry; the holes will be covered by the new counter top. Use a small square to extend the line of the stud location across the upper piece of wood in the back of the cabinet. Drill a pilot hole, for your 3 inch screws, and secure the backboard to the existing studs. Use the same procedure on the lower piece of wood to hold the cabinet in place. Your cabinet is now ready for your new counter top.
Installing a Bathroom Cabinet Base